GOLDEN EGG DEAL: Secabo TC7 LITE Energy Saver modular heat press 40cm x 50cm

The ultimate upgrade in energy efficiency and transfer convenienceIncrease energy efficiency and revolutionize your operation with the Secabo TC7 LITE Energy Saver. Equipped with Secabo's groundbreaking Energy Saver HP5 heating plate, this heat press presents an unprecedented fusion of technology and sustainability.Optimal energy efficiency meets elite performance:The integrated HP5 ES heating plate impresses with its additional insulation that significantly reduces standby energy consumption, promising savings of up to 80%. When in action, this hot plate is designed to operate more than 30% more efficiently, not only providing you with remarkable energy savings, but also helping to minimize your operation's carbon footprint.User-centric safety and ease of use:Thanks to the specially designed cover, your workers are protected from potential burns while further reducing energy consumption. At the same time, operating the hot plate without the cover is as easy as can be. A hand wheel allows you to precisely adjust the contact pressure, so you can get started in no time.Maximum cost efficiency for your business:Imagine saving up to 374 EUR in energy costs annually just by using the Secabo TC7 LITE Energy Saver for an 8-hour workday and an electricity price of 0.4 EUR/kWh. It is not only an impressive cost saving, but also a step towards a more environmentally friendly operation.The Secabo TC7 LITE Energy Saver represents the future of transfer press technology. It combines top-notch performance, energy efficiency and ease of use in one impressive package. It's time to take the next step and optimize your operation with Secabo's revolutionary technology. Discover the myriad benefits and increase the efficiency and sustainability of your operation.Eco-Friendly Design:Conserve resources through sustainable design and minimized energy consumption to reduce your environmental footprint.Optimized Energy Management:Intelligent energy management ensures lower consumption and minimal heat loss during operating hours.Consumption analysis:Ability to monitor energy consumption to better identify and take advantage of potential savings.Longer life:Reduced energy consumption ensures less wear and tear, resulting in extended equipment life.Cost savings:The cost-effectiveness of energy savings contributes to faster payback of initial costs.Increased productivity:More efficient energy management enables longer uptime, increasing productivity.Lower CO2 emissions:By using energy-efficient technologies, CO2 emissions are significantly reduced, helping to protect the environment.Improved heat transfer:Optimized energy efficiency provides more consistent and precise heat transfer for transfer presses.Smart energy features:Innovative technologies such as automatic shutdown and sleep mode during inactivity further save energy.Features:Transfer press opens automatically after time has elapsedDigital controller for temperature and time Temperature (max. 250°C) and time can be set on the controller using arrow keysModular design, components can be easily exchangedUpgrade to Secabo SMART version possible at any timeEasily adjustable contact pressureHigh-quality heating plate with additional protective plateSuitable for all common transfer processesCan be retrofitted with accessories such as exchangeable plates, slide extension or membrane heating plate for even more productivity.
Our innovative Energy Saver models are the result of extensive research and development and offer impressive energy savings. The specially designed insulation significantly reduces energy consumption in standby mode, lowering operating costs while reducing the carbon footprint of your operation. But the benefits go beyond energy savings. The unique design also provides more even heat distribution, resulting in more precise and consistent results with every print.
Our LITE models are equipped with electronics developed based on Secabo's extensive industry know-how. The digital controller for temperature and time allows you to make the desired settings easily and quickly. And of course you can switch between C° and F°. The control concept has been deliberately kept simple to enable the user to handle the press even more effectively.
With the Secabo LITE version, you have numerous options to create your own ideal work tool. Due to the modular design, our LITE models can also be converted to the SMART model. In addition, you can also upgrade with the passive membrane bottom plate. The membrane can be easily inflated via a small blower ball. This allows you to determine the maximum compensation height of the membrane for a transfer. The contact pressure is set as usual on the transfer press, for example via a handwheel on the heating plate. The possibilities are therefore diverse and easy to implement individually according to your needs with the LITE version.
Dimensions open | 43cm x 93cm x 74cm |
Dimensions closed | 43cm x 57cm x 75cm |
working area | 40cm x 50cm |
scope of delivery | Mechanical base, heating plate and base plate, LITE controller box, C13 IEC power cord, tools, operating instructions |
pressure setting | the heating plate can be adjusted with a hand reel |
max. downforce | 250 g/cm² |
max temperature | 250 °C |
maximum time preset | 999 s |
max. clam angle | 40 ° |
power supply | AC voltage 230V / 50Hz - 60Hz, 1.8kW |
environment | +5°C - +35°C / 30% - 70% humidity |
Options | Quick-change system, various interchangeable plates, slide extension, membrane base plate, TB7 Thermobase |
weight without packaging | 39 kg |
weight with package | 50,60 kg |
Brand | Secabo |
A heat press, transfers text, logos or images onto different materials. The device works with pressure as well as heat in order to achieve long-lasting results. A heat press is like a large iron, but with more pressure and more intensive heat. Heat presses are suited for a wide range of transfer processes.
Self-adhesive fiberglass film with PTFE coating. As a replacement for damaged or worn non-stick...
Cover film with PTFE coating. Suitable for protecting transfer objects, for direct printing or...
Cover for a heat press base plate with dimensions of 40 x 50cm. Heat-resistant up to 220°C....
With the Secabo quick-change system, up to three exchange plates can be mounted next to each...
Removable plate for Secabo transfer presses 12cmx38cm. Fits the models TC5 / TC5 SMART, TC7 / TC7...
Removable plate for Secabo transfer presses 20cmx30cm. Fits the models TC5 / TC5 SMART, TC7 / TC7...
Removable plate for Secabo transfer presses 15cmx15cm. Fits the models TC5 / TC5 SMART, TC7 / TC7...
Removable plate for Secabo transfer presses 8cmx12cm. Fits the models TC5 / TC5 SMART, TC7 / TC7...
Mounting kit for directly mounting a Secabo removable plate to the base of a Secabo heat press....
The Secabo LITE and SMART series can now be converted into a convenient double-plate transfer...
The membrane base plates by Secabo create new opportunities in the implementation of your Secabo...
Heat-resistant silicone pad, to compensate for irregularities (eg. tiles) for to protect...